Sensor Parameters

The server detects available device sensor parameters automatically, but the user should configure them manually. This allows the user to choose which sensors to monitor.

    1. Make sure all needed sensors are connected to GPS device, for example ignition, doors, fuel, inputs, outputs and etc.
    2. Drive your vehicle, turn on and off the ignition, open and close doors and so on.
    3. The server will auto-learn and detect all possible sensor parameters.
    4. Detected sensor parameters will appear in “Edit object/Sensors/Sensor properties” Parameter select box.

    Sensor parameters description

    Sensor Description Possible values
    alaX ala – Alarm, X refers to alarm number 0 = no alarm, 1 = alarm
    acc ACC status 0 = off, 1 = on
    accv ACC voltage Value
    batl Battery level Value
    batp Battery percentage Value
    batv Battery voltage Value
    bats Battery status 0 = not charging, 1 = charging
    diX di – Digital Input, X refers to input number 0 = off, 1 = on
    doX do – Digital Output, X refers to output number 0 = off, 1 = on
    aiX ai – Analog Input, X refers to input number Value
    aoX ao – Analog Output, X refers to output number Value
    canX can – CAN port data, X refers to CAN port number Value or String
    tempX t – temperature, X refers to temperature meter number Value
    fuelX fuel – Fuel level, X refers to fuel meter number Value
    pump Fuel pump status 0 = off, 1 = on
    ibut iButton for driver ID String
    rfid RFID for driver ID String
    odo Absolute odometer in km Value
    odor Relative odometer in km (between two records) Value
    engh Absolute engine hours Value
    enghr Relative engine hours (between two records) Value
    gsmlev GSM signal level, signal strength Value
    gpslev GPS signal level, number of satellites Value
    hdop HDOP Value
    pdop PDOP Value
    vdop VDOP Value
    track If device is in tracking mode or not 0 = no, 1 = yes
    sleep If device is in sleep mode or not 0 = no, 1 = yes
    move If device is moving or not 0 = no, 1 = yes
    accel Accelerometer status 0 = no, 1 = yes
    dlog Data logging status 0 = no, 1 = yes
    balance SIM card balance String
    lac GSM Location Area Code String
    cellid GSM Cell ID String
    mcc MCC String
    mnc MNC String
    can_sysev CAN system event String
    can_vemot CAN vehicle motion String
    can_clus CAN clutch pedal state String
    can_bres CAN break pedal state String
    can_accs CAN acceleration pedal state String
    can_crus CAN cruise control state String
    can_ptos CAN PTO state String
    can_enplcs CAN engine PLCS String
    can_tyreloc CAN tire location String
    can_axlew CAN axle weight String
    can_axloc CAN axle location String
    can_haninf CAN handling information String
    can_dirind CAN direction indicator String
    can_flev CAN fuel level String
    can_fcr CAN fuel consumption rate String
    can_feco CAN fuel economy String
    can_pto CAN PTO String
    can_hrfc CAN HRFC String
    can_dist CAN distance String
    can_amt CAN ambient air temperature String
    can_ect CAN engine coolant temperature String
    can_rpm CAN RPM String
    can_engh CAN engine hours String
    can_srdist CAN service distance String
    tco_dist TCO distance String
    tco_trip TCO trip String
    tco_vespd TCO vehicle speed String
    tco_rpm TCO RPM String